[RESOLU] Wamp et diffusion externe

16 mai 2013, 10:30

Bonjour ou re-bonjour,

Voilà mon soucis. J'ai suivie pas mal de tuto et fils de discussions de personnes dans le même cas que moi, mais ça n'a pas résolus mon problème.

En fait depuis hier soir (je me suis ramené un peu de boulot à la maison :p), j'essaie de rendre accessible mon "site" depuis le net.

J'ai déjà fait la redirection de port externe vers interne sur ma machine, j'ai également souscrit à un no-ip.org histoire de pas me faire chier avec l'ip dynamique et mon site est dors est déjà accessible en local.

Mais je n'arrive pas à y accéder via le net :'(

Si quelqu'un à un peu de temps à m'accorder pour voir ça

Merci.

16 mai 2013, 14:17

Personne ? :'(

Je pense que c'est au niveau des httpd.conf et httpd-vhosts.conf que ça bloque, mais même sur le site de wamp, je n'arrive pas à comprendre les explications à leur sujet ^^'

16 mai 2013, 20:21

salut,

est ce que sur le réseau interne (chez toi) depuis une autre machine tu accède au site ? (genre http://192.18.1.12/lesite/ ?)

tu peux avoir :
- un problème de firewall
- un problème de conf d'apache
- un problème de redirection (règle nat de la box qui déconne)

@+

17 mai 2013, 09:35

Bonjour et merci Moogli pour ton attention

Alors depuis le réseau local, j'accède bien à mon site, les règles NAT de ma box semblent bonne, et je ping bien mon PC en passant par le DNS.

Perso je pense à un problème de la conf apache mais je ne vois pas quoi

Quelqu'un s'y connait bien en httpd.conf ? :p

17 mai 2013, 11:26

Modération :
Afin d'obtenir plus de réponses, le sujet a été déplacé dans un forum plus approprié.

Quand tu dit que tu le ping par le dans c'est a dire d'une machine extérieure au réseau local ?
Attention aux règles "basique" des box des fois elles se prennent les pieds dans le tapis toute seule

.

Est ce que tu as moyen de voir ce qui arrive sur ta machine ? (Rien que les logs Apache il peut refuser la connexion et la tracer).
Quand tu test tu as une erreur 404 ?

Est ce que tu peux poster le httpd.conf ?

@+

17 mai 2013, 11:45

Merci pour le déplacage, c'est vrai que j'ai fait le boulet sur se coup ^^'

Alors, le serveur est chez moi parce que ma box est facile à configurer (au taf faut toucher au serveur dans tout les sens et mon supérieur n'est pas là, donc j'y touche pas sans lui ^^')

Donc je ping depuis le boulot l'ordi qui est chez moi, et je le contrôle via logmein.

Dans la box (une livebox, beurk) je suis aller dans les config avancé, et j'ai mis une règle NAT que voici

Nom : Site Port externe : 80 Port interne : 80 Protocole : Les deux (TCP/UDP) Équipement : GLadOS-PC (Le nom de ma machine) Activer : v (pour voui lol)

Voici le httpd.conf

Code : Tout sélectionner

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "c:/wamp/bin/apache/apache2.2.22"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module "c:/wamp/bin/php/php5.3.13/php5apache2_2.dll"

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. [email protected]
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "c:/wamp/www/"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Allow from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "c:/wamp/www/">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride all

    #
    # Controls who can get stuff from this server.
    #

#   onlineoffline tag - don't remove
    Order Allow,Deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "c:/wamp/logs/apache_error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "c:/wamp/logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php .php3

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Include "c:/wamp/alias/*"

Et voici le httpd-vhosts.conf

Code : Tout sélectionner

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#

#<VirtualHost *:80>
#    ServerAdmin [email protected]
#    DocumentRoot "c:/apache2/docs/dummy-host.example.com"
#    ServerName dummy-host.example.com
#    ServerAlias www.dummy-host.example.com
#    ErrorLog "logs/dummy-host.example.com-error.log"
#    CustomLog "logs/dummy-host.example.com-access.log" common
#</VirtualHost>
#
#<VirtualHost *:80>
#    ServerAdmin [email protected]
#    DocumentRoot "c:/apache2/docs/dummy-host2.example.com"
#    ServerName dummy-host2.example.com
#    ErrorLog "logs/dummy-host2.example.com-error.log"
#    CustomLog "logs/dummy-host2.example.com-access.log" common
#</VirtualHost>

<VirtualHost *:80>
    ServerName localhost
#    ServerAlias localhost
    DocumentRoot "c:/wamp/www"
    ErrorLog "logs/error-test.log"
    Alias /bib_jquery "c:/wamp/www/"
    <Directory "c:/wamp/www">
	 #   Option Indexes FolloowSymLinks MultiViews
	    Options -Indexes
 	    Order allow,deny
	    Allow from all
    </Directory>
    <Directory "c:/wamp/www/cgi-bin">
	    Options +ExecCGI
    </Directory>
#    <IfModule alias_module>
#	    ScriptAlias /cgi-bin/ "c:/wamp/www/cgi-bin/"
#    </IfModule>
</VirtualHost>

<VirtualHost *:80>
    ServerName livesapic.no-ip.org
#    ServerAlias livesapic.no-ip.org
    DocumentRoot "c:/wamp/www/test"
    ErrorLog "logs/error-test.log"
    Alias /bib_jquery "c:/wamp/www/test/"
    <Directory "c:/wamp/www/test/">
	    Option Indexes FolloowSymLinks MultiViews
#	    Options -Indexes
 	    Order allow,deny
	    Allow from all
    </Directory>
    <Directory "c:/wamp/www/cgi-bin">
	    Options +ExecCGI
    </Directory>
#    <IfModule alias_module>
#	    ScriptAlias /cgi-bin/ "c:/wamp/www/test/cgi-bin/"
#    </IfModule>
</VirtualHost>

Merci pour le coup de main (ou aujourd'hui :p)

17 mai 2013, 15:09

Bonjour,

Vois tu les entrées correspondant à tes requêtes dans le
c:/wamp/logs/access.log

Si tu ne les vois pas c'est un problème réseau.

Cordialement

21 mai 2013, 08:20

Bonjour,

Désolé pour cette absence.

Alors, dit moi, comme je ne suis pas très doué, que dois-je trouver dans le fichier access.log ? ^^'

Je dois voir si j'ai des entrées quand j'essaie de me connecter dessus depuis un réseau externe ?

À priori je n'ai eu que des connexions local... Par contre, que dois-je taper dans ma barre d'adresse pour tomber sur mon site ? mondomaine.no-ip.org:80, juste mondomaine.no-ip.org, ou bien mondomaine.no-ip.org/monsite ou même d'autres choses ?

Ce n'est pas très claire pour moi ^^'

/!\ ÉDIT : Bon apparemment mon problème est résolu

mon poste serveur n'était pas en IP fixe sur mon réseau, je ne pensais pas que cela poserait de problème vu que la redirection de port se fait avec un nom d'hôte et pas avec l'IP, bref donc là, je ne sais pas pourquoi mais ça m'a chatouillé d'essayer ça, et ça à résolu le problème. Une semaine de perdu :p sale bête cet ip lol.

Merci pour votre écoute et vos conseils./!\

Édit2 : J'allais oublier. Encore une victoire de Canard !!

21 mai 2013, 10:01

Alors, dit moi, comme je ne suis pas très doué, que dois-je trouver dans le fichier access.log ? ^^'

Je dois voir si j'ai des entrées quand j'essaie de me connecter dessus depuis un réseau externe ?

Voilà ! Apache loggue toutes ses connexions. Grosso modo:
* Tu vois des entrées correspondant à tes connexions => Apache reçoit les requêtes => Le problème se situe a niveau d'apache (qui pour une raison ou une autre ne répond pas correctement)
* Tu ne vois pas d'entrées correspondant à tes connexions => Apache ne reçoit pas les requêtes => Le problème est au niveau réseau (ce qui manifestement était le cas ici)
C'est un réflexe à avoir lorsque tu cherches à régler ce genre de problèmes.

Cordialement

22 mai 2013, 10:05

Bonjour,

Ouaip, réflexe que je n'ai pas lol.

Pourtant je savais où était les logs, vu que j'ai donner les chemins d'accès dans le httpd.conf ^^'

Merci en tout cas

[RESOLU] Wamp et diffusion externe

Qui est en ligne